Definitely anti-lags.
It was designed to have boost off corners and for launches. As usual, douche bags use it in the most useless way… Coasting to a stop.
One idiot around the way I guess finishes from work around 10PM and has to let everyone know. His car sound like those 50 gal rectangular thrash containers if they were to get ran over/ roll over.
While this is true, some parts are so simple and have been designed/updated with so much experience and feedback, the defect can only be because of Quality control or Bad design.
Like if shopping around get them the material that is so cheap it is not the same, if the parts weren’t treated or finished like designed, if the tolerances are the issue or some other problems you would think should not be an after decades of engineering in engines.
I would appreciate more infos on if manufacturers have something like design rules that would say any rod bearing for cranks of X diameter,x oil grade made to spin to x RPM and up to X operating temperature needs to have X fitment and X metal treatment to avoid this issue.
Even when the hood isn’t that high, a boxy front-end — with a grille that’s nearly vertical and a hood that goes almost straight out from the windshield — is more likely to cause death or serious injury to a pedestrian. In general, vehicles with box-shaped front ends, even when they’re only medium height, are roughly 26% more likely to kill a pedestrian, according to the IIHS.
The article clarifies that it’s the vertical and boxy shaped front end that is the cause of more lethal torso injuries.
A sporty shaped front end will put it back to normal ( even more if lower).
Body on frame car is very old (80’s).
Since then cars are unibody which means the frame part is integrated and spread across the body and floor parts.
Manufacturers have moved on to subframes. A strong U or boxshaped tube rail to fasten powertrain mounts, steering, suspension arm and all moving parts onto. They then bolt the subframe to the unibody with dampers and bushings to reduce NVH into the cabin.
For soundproofing, most windshields now have 2 panes with glue sandwiched between the 2, the pillars are filled with foam, door panels and the floor have strategically placed thick sheets of sound dampening,
As for smoothness, lots of cars have different suspension to do the job. The standard is the multi-link suspension( many control arm with different range of rotation and angles that together keep the wheel flat on the surface if you accelerate, Brake, corner) having as many arms as possible helps the ride stay smooth and quiet.