minus-squareDoJu318@alien.topBtoBMW@gearhead.town•Question about a 2013 328 x-drive with a lowered suspensionlinkfedilinkEnglisharrow-up1·10 months agoThe reverse rake is because the front struts and springs are different to accommodate for the front axle and half shafts. There isn’t a lot of room to lower the front on an xdrive while the rear is usually the same. In a normal car it would be 1.5 inches lower all the way around. On an xdrive is 1.5 Lower in the back 1 in the front. You can get different springs for the rear to even it out, or use taller spring pads. That’s what I had to do on my xdrive to make it look even all around. linkfedilink
The reverse rake is because the front struts and springs are different to accommodate for the front axle and half shafts.
There isn’t a lot of room to lower the front on an xdrive while the rear is usually the same.
In a normal car it would be 1.5 inches lower all the way around. On an xdrive is 1.5 Lower in the back 1 in the front.
You can get different springs for the rear to even it out, or use taller spring pads.
That’s what I had to do on my xdrive to make it look even all around.