Hi, I have possibly messed up…
I scored a 10Tb SAS drive (Ultrastar DC HC330) and went looking for an interface card. I have ordered a 9212-4i4e, which has 4x SATA ports internal and one external SFF-8088 SAS port. I figured future drives I add were more likely to be sata than sas but my read of the manual is that the sata ports can also take SAS drives.
Trying to figure out what cables I need for SATA to SAS and got a bit lost. I then figured I could just loop the external SFF-8088 back inside the case and that looks like is really more for an external device that houses the SAS drives?
Help!
edit : link to specs
https://docs.broadcom.com/doc/12353334
Honestly you bought the wrong card for internal SAS hard drives. You can make it work with some adapters but it is going to get messy.
As you have discovered the SFF-8088 port is on the back of the card for connecting an external box of drives. You can use an SFF-8088 to 4X SATA cable like this and loop the cable from outside your case back inside.
https://www.amazon.com/CableCreation-SFF-8088-Female-Controller-Backplane/dp/B013G4EX9K/
But this won’t work with your SAS hard drive. That cable is for SATA hard drives and SAS drives have an extra bit of plastic to prevent connecting a SATA cable.
https://imgur.com/a/9zieTy8
You can use this SFF-8088 to SAS cable and loop it from the back of your case to the inside but you see it requires a bunch of Molex connectors to provide power for the drives. If you had that many free Molex connectors then buy this cable.
https://www.amazon.com/Mini-SAS-SFF-8088-SFF-8482-Power-Cable/dp/B08NGJ7F5K
What you really should have bought is an LSI SAS HBA “8i” or “16i” card that have SFF-8087 ports designed for internal use. Then you can use this cable with connectors to the SAS data ports on the hard drive and then uses SATA power connectors to power the SAS hard drives.
https://www.amazon.com/AdcAudx-Mini-SAS-SAS-Cable-Internal-SATA-Power/dp/B09Q33VV5V/
You could get a bracket like this and an 8088 to 8088 cable to connect outside your computer and then it would effectively give you an SFF-8087 port. Then you could use either of the SFF-8087 to 4X SATA or 4X SAS cables.
https://www.amazon.com/CableDeconn-SFF-8088-SFF-8087-Adapter-Bracket/dp/B00PRXOQFA/
https://www.amazon.com/CableCreation-External-26pin-SFF-8088-Cable/dp/B013G4F3A8/
All of the cables above are normal forward breakout cables. When you read the manual and it says that the 4 internal SATA ports support SAS drives it is technically true but how do you connect them? The people who would use that feature are usually connecting to a SAS backplane with an SFF-8087 or other type of SAS port. So they would use a reverse breakout cable but you don’t have a backplane so forget about that.