Unfortunately if it’s the same as Melbcat’s the bottom ‘shelf’ is far too small to put a cat carrier in. So no chance of doubling up like that.
Edit: Unless heavily modified… 🤔 but no. I think the cavity beneath the original capsule would still not be tall enough and not deep enough. The front panel saying ‘Pawz’ could be removed so the carrier could be pushed forward between the struts (and secured with a strap) but the frame would be too narrow to allow that.
I meant sticking a standard plastic airline style carrier in underneath for the second boy, so they’re separated and can’t punch on.
But I think even if modified for more room the dimensions of metal frame wouldn’t allow that
Edit. This is what I mean. The smaller fabric shelf and front Pawz panel could be removed and replaced with a larger shelf, if it was large and rectangular enough to hold a standard plastic carrier. Like these for under rollators or wheelchairs.
But the room below might not be enough and could cause issues if the bottom carrier was riding too low.
And the width of the plastic carrier might be too much to slip between the pram legs for that little extra room for the top front edge.
maybe I’ll put both in there one time, they just have to not fight
They need one with two compartments.
Unfortunately if it’s the same as Melbcat’s the bottom ‘shelf’ is far too small to put a cat carrier in. So no chance of doubling up like that.
Edit: Unless heavily modified… 🤔 but no. I think the cavity beneath the original capsule would still not be tall enough and not deep enough. The front panel saying ‘Pawz’ could be removed so the carrier could be pushed forward between the struts (and secured with a strap) but the frame would be too narrow to allow that.
The stroller is big enough, the fluff makes the boys look big, and the weight specs can carry them both, they just have to be nice to each other
I meant sticking a standard plastic airline style carrier in underneath for the second boy, so they’re separated and can’t punch on.
But I think even if modified for more room the dimensions of metal frame wouldn’t allow that
Edit. This is what I mean. The smaller fabric shelf and front Pawz panel could be removed and replaced with a larger shelf, if it was large and rectangular enough to hold a standard plastic carrier. Like these for under rollators or wheelchairs.
But the room below might not be enough and could cause issues if the bottom carrier was riding too low.
And the width of the plastic carrier might be too much to slip between the pram legs for that little extra room for the top front edge.
It’s just easier to see how they will be and if they fight too much then I will leave one of them home.