Heeeyyy Yooooouuuuu Guuuuyyyyyysss!

Which she did. FTFY.

I’m not a lawyer, but if I wasn’t planning to do anything related to the other ‘dedsec’, I wouldn’t even consider what the owner of that dedsec would think.

Businesses have the same name ALL THE TIME.

Unless you’re trying to piggyback on or undermine that other dedsec, I, the non-lawyer, can’t imagine how they’d have any standing to raise a concern.

Whatever you’re doing must have led you to the dedsec name (I assume it’s a website for dog-eat-dog security), there’s just no way in my (non-lawyer) mind that EA or Ubisoft has any right to stop you from saving dogs from being eaten.

I (the non-lawyer) would 100% not pay a lawyer for their opinion on this.

On the 9300-16i, I have been seeing the connected drives under a ‘physical drives’ menu that appears if drives are connected… on the 9305 I did not…

Would you expect the drives to spin up on boot?

I’ll try booting into proxmox and running lshw on both cards tomorrow. Thanks for the route to test!

Ok. Did a bunch more testing here tonight.

I have 2x 8tb SAS drives that have worked for several weeks now. Those show up in bios reliably regardless of which connector I use. So I think the HBA is working and the cables are good.

Of the 10x 10tb drives, 1 drive shows up reliably. It also seems to work on any connector I use. But it is the only drive the works.

Here is 8 of the 10 installed and only one showing in BIOS. I think the other 7 are not even spinning up.

An additional weird thing is that at least 1 other of the 10 drives did show up the first time I plugged it in from inside the xpenology VM. I did ‘hot swap’ that one in, but it then passed a SMART test. But since it passing the test and me pulling it, it hasn’t worked again. I’m also not positive which drive it is because originally I wasn’t expecting things to behave so weirdly, so I didn’t start taking notes…

As another test, I got a hold of a 9305-16i to see if the drives would read on that. And while that card would show up in BIOS, none of the drives – including the 8th that have always worked – showed up or spun up at all! I wonder if that card is not compatible with my mobo?

Is it possible other BIOS settings are interfering?

Ok. Did a bunch more testing here tonight.

I have 2x 8tb SAS drives that have worked for several weeks now. Those show up in bios reliably regardless of which connector I use. So I think the HBA is working and the cables are good.

Of the 10x 10tb drives, 1 drive shows up reliably. It also seems to work on any connector I use. But it is the only drive the works.

Here is 8 of the 10 installed and only one showing in BIOS. I think the other 7 are not even spinning up.

An additional weird thing is that at least 1 other of the 10 drives did show up the first time I plugged it in from inside the xpenology VM. I did ‘hot swap’ that one in, but it then passed a SMART test. But since it passing the test and me pulling it, it hasn’t worked again. I’m also not positive which drive it is because originally I wasn’t expecting things to behave so weirdly, so I didn’t start taking notes…

As another test, I got a hold of a 9305-16i to see if the drives would read on that. And while that card would show up in BIOS, none of the drives – including the 8th that have always worked – showed up or spun up at all! I wonder if that card is not compatible with my mobo?

Is it possible other BIOS settings are interfering?

Ah. Will trying to hit swap damage the drives? Or just won’t work?

Drives are hot-swappable with this HBA, right?

Will give this a go! thanks!

One of the drives for reference:

Ok. Fair enough.

I’m still working on the first 2, but on the 3rd, yes there are a couple drives that are up and working on the card. 2x 8tb drives (also HGST).

They are SAS drives, not sata. Mobo does have SATA, but not SAS.

I do!

Thanks for the link!

Yah. Trying to make an Uber server.

Bunch of drives for a nas vm

3060 for a bit of a gaming pc cam for things like moonlight.

Rx590 is for a hackintosh vm to make local backups of my iCloud stuff.

And a unix vm to manage docker containers.

Also plan to put Plex in a LXC (I think that’s the term) on Proxmox so it can hardware decode using the igpu.

Welp. Seems I’m an idiot. I’m very much a Unix noob so assumed it was something that Unix I didn’t understand rather than check the physical card again.

I was definitely shipped an nvidia card, not the amd I bid on! So case opened with eBay!

Sorry for the dumb question. Thanks for the great help.

Stay tuned for my next dumb question. :)

How do you do this? Idk what to even google, exactly.

So in the end, the intel 1g NIC just worked, so I gave up for now on trying to get the 2.5g Broadcom working instead.

I might try to link aggregate later and use the 2.5g Broadcom and circle back on this… but we’ll see.

I also got the second GPU installed and it shows up, too. But it’s an Rx590 and is showing as an RTX2070… so I’ll be making another post shortly!

Thanks for all the input!

I have no experience with dmesg and also don’t know how to scroll the history since I’m not on a terminal app (since I can’t get the NIC up).

Anything here helpful?

Ohhh. In that last line. I wasn’t even looking at that, I assumed the block above that was setting up the primary NIC…

I’ll see if changing that interface name does it…

It’s late. I’ll have to pull the card and re run tomorrow. But here’s with the GPU in:

It’s an i7-14700 and an ASRock z690 extreme. I’m actually hoping to put a second GPU in the last PCIe slot so I can let proxmox use the iGPU, pass the 3060 into a Unix moonlight gaming VM, and pass an RX590 into a hackintosh VM.