https://preview.redd.it/5u0ir0f8zl3c1.jpeg?width=3456&format=pjpg&auto=webp&s=ecfe89f0efbd7e4d98259d54a23467b089d73edb

Also did I mention I had no power at all using the test light testing for hot on the light bulb holder/socket (pic attached ) does that mean anything? Is there anyway of rigging this thing I literally only need it to work for 3 seconds smh it’s so crazy all this he failed me for a light I don’t even need smh but like u said I need it to work as it should … Sorry if I’m messaging too much I’m getting control just down in the dumps over the whole thing I GREATLY APPRECIATE YOUR HELP IM SO Grateful you’ll get tired of me thanking ya I’m sorry lol

I did read somewhere I think that someone used a headlight for a different year and had issues but I don’t remember where I read it …

The socket works as I told ya I cut it and wired it to the battery when I thought I could rig it before I knew about your test …wanted to make sure it wasn’t that bulb housing it is not …so I rewired the bulb socket back into the headlight assembly and now I’ll try the following of the brown n white wire like you said ! So basically the brown with white is a ground for the corner light ? And the brown is the power ! your saying my ground isn’t working or something like that but does it make sense that everything else works ? So I’m guessing the ground for the corner light is it’s own ground ?! Am I close or way off ? Thank you this really is helping me I’m understanding a lil more at a time … I’m hoping your right and I find this this break thats what I’m looking for right ? A break or tear in the brown wht wire ? is there a way to check the assembly could it be in there ? or I think your saying it’s from the turn signal switch up to the part that plugs into the hl assembly?! Just let me stop thinking and do what you told me to do if I don’t go back out tonite tomorrow I’ll go out first light and following the wire you told me to and then I’ll report back ! THANK YOU SO MUCH I HOPE YOU have a great nite and I’m grateful for your help !!

Ok so I’m I’m gonna be looking at the brown/white wire in the 6 pin harness correct ? Basically take the tape off and follow that wire !? How far do I go and I’m looking for breaks and tugging at connections correct ?( Pic of the harness I’m starting with attached) it’s like a learning a different language but way way harder id rather pull and put in 50 drivetrains lol

https://preview.redd.it/eacfdx1jxl3c1.jpeg?width=3456&format=pjpg&auto=webp&s=ffe9c80d921ad2688a43133e8682e8fcc4b2c8cb

Ok next I tested the part the bulb goes into and it had no power and has a brown n red wire and a brown n white Is the white the ground ? Electrical is really confusing to me so bare with me pls ! So is the brown wire that goes into the assembly the hot for the corner light and if it is can I jump that to the corner light bulb harness and just run it like that to get thru inspection? See what I’m saying ?? I have the assembly right here in looking all over for a broken wire but so far don’t see any maybe it’s in the part that you plug the harness into the headlight assembly we’re I can’t see !?!? Any thoughts on what to do next please ? Thank you again for your help !!

I’m hoping that brown wire is the power and I can just rig it some how until hear back from you I’m gonna pause where I’m at in kinda confused after this point honestly!!

Wow awesome im so grateful for your help I cannot express it enough !! Thanks for the guide I can’t wait till daylight so I can get out here and try what you instructed!! I’ll get back to you and let ya know what I find ! Now question as far as the avistart4200 remote start and there’s a npk xk-04 keyless bypass module do you think it could possibly have to do with them making the corner light niot work ? It definitely its crudely wired I removed the white wire from the l.c.m under there it was just tapped onto the wire and a quick price of tape was thrown over it lol smh figured Id ask the guy who flunked me said if he was me he would remove that but I’m like dude if I do it wrong won’t my car be bricked !?? I know on e thing at a time but I figured I’d ask ya ! I’m really hoping amd praying it’s broken wire or something and not the modules smh with Xmas coming and all I’ll be in deep water !!! so far in close to budget smh THANK YOU THO FOR HELPING can’t express the gratitude and thanks !!! Just waiting for morning and I’ll get out there with the test light !!! you have a good nite and hopefully I have good news next time we talk 🙏 ty again g.n

Okay awesome im going to exchange the multimeter for the test light and then I’m gonna follow your instructions you gave me and I’ll let you know what I get THANK YOU SO much I can’t say how grateful I am for any kind of help r.n !

Ok glad I seen this again so I bought a multimeter will that work for these steps ? Im about to go see if I can get a light instead anyway Im gonna follow these steps and hopefully I find it I did get failed for the corner light smh also I found a crudely wired remote start with a toggle switch under there that kinda worry’s me one of the wires was tapped into the lcm a white wire I believe and I took it off and still no corner light …Ill follow all the steps u laid out hopefully the multimeter works ! Or I may go grab a test light instead ! I’ll let u know what happens thanks again