Instead of being a dick, you can actually research that MXM gpu replacements are not a guarantee when replaced.

Yes, I know, I’ve been doing this longer than you have.

I had an M4000M and 980M in my EliteBook 8770W and put an M2200M in my 8540p.

It can be a bios error, or there can also be that there is no onboard graphics, to display the screen image between card swaps.

The BIOS “errors” are actually whitelists put in place by the manufacturer and can be bypassed with an EEPROM programmer.

Lack of onboard graphics can be fixed by getting a laptop with eDP as LVDS requires iGPU and a mux.

Im over here uploading drivers for a old card for win 11, and you gotta be a dick.

I’ve had 342.xx on my Mediafire for 7 years for the 8540p GPU swap. Like I said, you’re not special, quit acting like you are, people know more about this than you do. Kindly fuck off.

This is the only tutorial like mine, what an ass you are.

Wrong on so many levels

https://www.youtube.com/watch?v=LSM66zC3r-g

https://www.youtube.com/watch?v=oFTHO8pyIKc

https://web.archive.org/web/20200314045456/http://forum.notebookreview.com/threads/m4700-owners-thread.682758/

You.

Aren’t.

Fucking.

Special.

Googled your board and it says it is a micro ATX board so the case should fit.

It’s BTX from an old Optiplex or something. I’ve worked with these plenty before.

I am a newbie so i am trying to learn the best approach. Any help would be appreciated.

Jesus fucking christ almighty go on youtube and look up how to build a PC, modding one when you know nothing is one of the dumbest things you can do. Holy shit.

You already have a micro ATX motherboard. What are you trying to adapt??

https://www.ebay.com/itm/295961733878?

Bro the E210882 is a COMPLETELY different form factor called BTX. Unless you get a dremel and re-orient the rear of the case, drill new standoff mounts, and move the PSU somewhere, you’re not adapting anything at all, ever.

It’s a BTX motherboard. There’s no adapting this.

Congrats you followed a tutorial on NotebookReview forums.

I have a ZBook 17 G2 (K610M originally) that I put a P4200 in, you’re not special.

sell the 3050 on ebay, and buy a proper motherboard, CPU, and case.

v3 and v4 Xeons are still great and you can get a 14c28t for $25. I have one paired with my A2000 and it runs CP2077 at 1080p Ultra and that was before even power modding the GPU.

Incorrect once again

Or maybe you’re just dumb

Please stop building snowblind PC mods. They suck and the novelty wears off when you realize how shitty and useless they actually are. Stick a 7in IPS into your PC like everyone else and save yourself the trouble.

Because I have REPEATEDLY stated that I replaced the original radiator with one from Cooler Master and this fucking dumbshit can’t read and insists it’s from Asetek. Yes, the Cooler Master rad is also made by asetek. Who fucking cares?

Fuck off.

Just another know-it-all thinking you know my process an what I did. This is why I get pissed when [censored][censored][censored][censored] like you come around.

asetek and coolIT used bronze bearings which can seize when not in use for an amount of time and clogged by the products of corrosion.

Yes, I know this

The 2080ti Hybrid includes an aio cooler which is made by Asetek.

Yes I know, the radiator literally has a label on it that says Asetek.

You are so dumb it’s pitiful.

https://i.imgur.com/JNcqq6D.jpg

temps and hotspot temp dropped by 40c lol, the old pump got clogged a few months after i refilled it due to Cooler Master’s poor aluminum radiator quality control.

there is no aio here

Before anyone downvotes me, the comment above is disparaging and assumes I don’t know what I am doing, very typical know-it-all German “I never passed engineering course” attitude.

special inhibitors

There’s NOTHIN special about propylene/ethylene glycol.

That is why you cannot put normal water in the loop. Manufacturers use non conductive liquid and special inhibitors so that almost no electromigration takes place.

Yea no shit, I used 50/50 PG mix. Every single Cooler Master radiator I hav, even pulled fresh off AiOs, hav this problem. It’s definitely just low quality aluminum meant for mass manufactured shit products meant to last 2-3 years tops. Several other alu radiators I have don’t have this problem.

Stop acting like I’m the dumbass here, I’ve been doing this for nearly 20 years, and I’m probably older than you.

You likely replaced the wrong part.

A full system bleed and refill with the same PG mix I’ve been using for 15 years isn’t a wrong part.

Delete your comment. Verpiss dich.

how do I downvote a comment multiple times without breaking reddit TOS?

special inhibitors

There’s NOTHING fucking special about propylene/ethylene glycol.

That is why you cannot put normal water in the loop. Manufacturers use non conductive liquid and special inhibitors so that almost no electromigration takes place.

Yea no shit, I used 50/50 PG mix. Every single Cooler Master radiator I have, even pulled fresh off AiOs, hav this problem.

Stop acting like I’m the dumbass here, I’ve been doing this for nearly 20 years.

Verpiss dich.

https://i.imgur.com/JNcqq6D.jpg

temps and hotspot temp dropped by 40c lol, the old pump got clogged a few months after i refilled it due to Cooler Master’s poor aluminum radiator quality control.