I use Ubuntu btw. Poweroff could use more write cycles on the SSD because it has to read everything at startup, but suspend has to keep supplying power to the RAM

  • skrlet13@feddit.cl
    0·
    21 days ago

    I poweroff. I have enough time to let it turn on and can save some energy. (Electricity is getting even more expensive)

  • andybytes@programming.devEnglish
    0·
    21 days ago

    I definitely shut down my systems from time to time just to make sure my network is configured correctly and shit doesn’t go haywire because I’d rather have that happen than the power go out and everything comes crashing down

  • Appoxo@lemmy.dbzer0.com
    0·
    21 days ago

    I could care less about the 5 cycles from 10.000.000 total cycles (dunno the actual number) at least for my desktop.
    As for my proxmox server: 5% wearout

  • Dizzy Devil Ducky@lemm.eeEnglish
    0·
    21 days ago

    Power off because usually when I turn my laptop off, I’m going to be keeping it off for a long enough period of time that suspend would just not be worth the battery drain.

  • circuitfarmer@lemmy.world
    0·
    21 days ago

    Nearly always suspend. It just works for me and I’ve never had issues (Arch and Pop). I rarely, rarely have power outages so the end result is the same.

  • DaPorkchop_@lemmy.ml
    0·
    21 days ago

    Just chiming in to point out that powering off and then starting back up won’t cause any additional SSD wear, reading from flash memory doesn’t use up write cycles* (because there is no writing going on!). In fact, regularly restarting could be slightly more friendly for your SSD, because the /tmp directory, old log files, etc. get deleted on startup, freeing up the storage blocks used by the deleted files so that the SSD can use them for its internal wear balancing.

    *technically, flash memory reads do very slightly degrade the data being read, but this effect is absolutely negligible compared to other forms of passive bit rot in flash memory and is basically irrelevant unless you’re intentionally trying to corrupt data using reads (which won’t happen because the flash controller will fix it before it becomes corrupt to the point of being illegible)

  • mannycalavera@feddit.uk
    0·
    22 days ago

    To be honest the experience over multiple laptops and multiple Linux distributions with regards to suspend or hibernate has been absolutely terrible for me. I now set my browser to remember all my tabs and simply shut down my machine when I’m not issuing it. It starts up in 30 seconds or less which is maybe 15 seconds more than waking from suspend or hibernate and it’s not likely to break or require complicated set up.

    🤷

    • naeap@sopuli.xyz
      0·
      21 days ago

      Yeah, because of the same experience for the last 2 decades, I always shut my stuff down as well.

      Then I gave an old laptop with Linux to my neoprene nephew. And without further discussion or thinking, he just pressed the power button, when he wanted it to be off - which triggered some kind of sleep mode
      I was so fucking nervous during that, as I had never tested for that, and for the young generation growing up with smartphones that was the obvious move.
      But surprisingly it works like a charm and goes into some kind of standby.
      At least I didn’t got any complains…

      • Panda@lemmy.today
        0·
        21 days ago

        Isn’t neoprene a synthetic material?

        My husband also uses the power button to power off his PC. I didn’t even know it was a thing until he asked me to do it for him at some point and I was very confused. He’s on Windows. I didn’t know this worked on Linux as well (though I know it’s a thing on laptops). Is there a way to configure what it does (on PC) like it does on laptops?

        • smort@lemmy.world
          0·
          21 days ago

          IIRC in the UEFI (aka BIOS), there’s usually a setting to dictate what a tap of the power button does—usually sleep, hibernate, or power off.

          Try tapping F10, F12, or Del during early startup to get into the UEFI setup

  • betterdeadthanreddit@lemmy.worldEnglish
    0·
    22 days ago

    I rip the plug out of the wall without warning. Gotta keep your machines on their toes or they’ll get too comfortable and start plotting against you.

  • Björn Tantau@swg-empire.de
    0·
    22 days ago

    Depends.

    My desktop gets powered off because I don’t use it often and it sucks a lot of energy and is loud.

    My Steam Deck gets suspended when I’m not using it because that’s usually in the middle of a game and I don’t want to hear the game sounds all the time or accidentally do something.

    My laptop is running 24/7. At night I use it to listen to science videos to help me sleep. And in the day I watch stupid YouTube videos to help me cope with life.

    • Pika@sh.itjust.worksEnglish
      0·
      22 days ago

      Not to mention the steam deck has a weird bug on it that if you leave it powered off for too long, for some reason it decides to just not turn on anymore unless you hook it to power. Super annoying because it will turn on and say something like 80 or 90% power, but the button won’t actually boot the system unless it has a power hookup. I’ve on a few occasions had to use reverse power charge from my phone to the deck to trick it into booting on the go. Once you hear the beep saying its turning on you can unplug it. Weirdest thing