ExtremeDullard@lemmy.sdf.org to 3DPrinting@lemmy.worldEnglish · 1 month agoBambu Lab Firmware Update Forces Cloud Dependency & User Lock-In - AVOID THEIR 3D PRINTERS!youtu.beexternal-linkmessage-square141fedilinkarrow-up1534arrow-down112
arrow-up1522arrow-down1external-linkBambu Lab Firmware Update Forces Cloud Dependency & User Lock-In - AVOID THEIR 3D PRINTERS!youtu.beExtremeDullard@lemmy.sdf.org to 3DPrinting@lemmy.worldEnglish · 1 month agomessage-square141fedilink
minus-squaretoynbee@lemmy.worldlinkfedilinkEnglisharrow-up1·5 days agoI think my first print was with the touch screen. I printed a few things by sending directly from the Qidi slicer that came with it, but it pretty consistently is crashing at 40-80% when connecting through the network. I’ve been using the web interface directly and that’s going pretty well.
I think my first print was with the touch screen.
I printed a few things by sending directly from the Qidi slicer that came with it, but it pretty consistently is crashing at 40-80% when connecting through the network. I’ve been using the web interface directly and that’s going pretty well.