If I recall correctly the maximum Noise Reduction Rating (NRR) for earplugs and earmuffs is around 30db. You can combine the two for a slight increase in hearing protection but you still hit a limit because of bone vibration.
Is there PPE out there to go even further beyond this? Where would it be commonly used?
I did some research about this for myself, the best I could find is an advertised -45dB (Remote Audio HN-7506), which makes me very skeptical, I couldn’t find any third party measurements but multiple reviews I read mention that they have about the same isolation as Etymotic earphones.
Active noise canceling is good but only for lower frequencies, it does almost nothing to mid and high frequencies, which is not necessarily a bad thing since mid and higher frequencies are easier to attenuate passively.
The best noise canceling headphones have an average noise cancellation of -27dB (-20dB in the bass frequencies), but the best noise cancellation that I could find (other than the HN-7506 that I don’t really trust) is from Etymotic earphones, they are completely passive and have an average attenuation of -32dB with -21dB reduction in the bass frequencies which is really impressive, they work so well because they are inserted much deeper in the ear which can be a bit uncomfortable. I read a lot of experiences from musicians and apparently if you use foam tips instead of the stock ones you can get even better isolation and slightly better comfort.
Another option is custom molded IEMs or earplugs, I couldn’t find measurements for those but based on comments from people that have them they seem to have slightly less isolation that Etymotic earphones but they’re are obviously infinitely more comfortable since they’re custom molded to your ears (there are also soft wraps that increase isolation but I don’t know how effective they are).
So if you want the best noise cancellation I recommend the Etymotic ER4XR or the Etymotic ER2XR (afaik most Etymotic earphones have the same body (so same isolation), choose them based on the sound signature you prefer), if you want good balance between noise cancellation and comfort get custom molded earplugs or IEMs.
My sources:
Headphones with best ANC measurements, Etymotic measurements (click on Isolation on the sidebar)
Can you define lower here?
In my experience, they’re most effective for higher frequencies (voices and higher), as lower frequencies are hard to attentuate (why we can hear/feel subwoofers from cars a fair distance away).
For example, a couple pairs I have are ineffective against the bass from the gym idiots running the aerobics room (wtf does it have to be loud outside the room - those women must be getting hearing damage), but it’s great for all the people talking, and some of the tvs.
I don’t know the exact frequencies but it’s something I read and noticed myself, and wikipedia seems to agree.
(Don’t know what that means.)
Personally I used the Sony XM3 a lot, on planes etc. which have great ANC, and I also used the Moondrop Blessing 3 which are just normal IEMs with no ANC and I only notice a difference in the low frequencies, you can also see that in the rtings measurements (XM3, Blessing 3), isolation in mids and treble is about the same, they seem to consider anything under around 250Hz as bass.
Yea, that “low frequencies” is rather ambiguous.
I could see over-the-ear headphones being better at “lower” frequencies than in-ear, both from material absorption and speaker size. Every ANC pair I’ve had, of any style, was pretty good at nearly eliminating the higher frequency noise while flying (engines, airflow noise, etc), and almost eliminated voices.
deleted by creator
I know nothing about this subject, but my instinct would tell me that anc would actually be protective. If you phase out sound, it
seizesceases to exist, right? That is the whole point of it?Again, pure instincts, don’t know shit myself.
*ceases, FYI (not being snarky, maybe autoincorrect got you on voice to text)
Edit: also “seizes” used here was kinda funny
Thanks for the heads up. Non-native, always willing to learn.
That’s just not true.
Your ear largely hears things through changes in air pressure. Projecting the same frequency and amplitude at the opposite phase prevents the change in air pressure in the first place. It’s literally cancelling the sound.
deleted by creator
You’re so wrong about this. ANC pretty much eliminates pressure inside the ear canal. That’s how ANC works. No pressure waves, no sound, no damage.
You’re not adding more pressure anywhere; you’re cancelling that pressure out.
Except that’s exactly how nose canceling ear phones work. It’s not like they have an external speaker projecting sound 🤦🏼♂️
Mine work like this: “Got your nose. Neener neener neener.”
deleted by creator
Bro. It’s not “just more pressure.” It’s literally less pressure.
If there are water waves moving a boat up and down, and you actively apply some movement (ha! pressure!) to the water so you generate waves that cancel the existing ones so that the boat stands still, would you say “but you don’t understand, the boat is getting MORE PRESSURE!!! It’s being damaged!!!”? Of course not. It’s pretty much the same principle.
Get a highschool physics book, read the chapter about sound, and come back. Otherwise, just stop.
This is partially correct, partially wrong.
As many have commented, flipping a signal by 180° cancels it out. However, this is only true for static noise though. Transient noise cannot be canceled out completely, because you would need to see into the future to know which signals to play to cancel out the noise.
The ANC headphones I own mainly cancel noise through passive shielding of the ears. The “active” noise canceling feature is not contributing a lot.