• I have yet to use a USB-C to 3.5mm dongle for my phone that hasn’t gone bust in my pocket in a few months. Probably time to see about a cable for the earphones that terminates in USB-C on the phone end, but that was difficult to search for.

    I love my wired ones, and have been nursing some BT earbuds for years, but it’s hard to use wired and not to move to BT anymore without buying a phone specifically for the 3.5mm jack.

    • redcalcium@lemmy.institute
      link
      fedilink
      arrow-up
      8
      ·
      7 months ago

      Get a portable dac amp so you can connect your wired headphone over usb-c and upgrading its sound quality at the same time.

      • scrion@lemmy.world
        link
        fedilink
        arrow-up
        17
        ·
        7 months ago

        Hyperbole aside, I’d still be worried that any cable physically connected to my phone would break the port over time - mostly because that has happened to me in the past with multiple devices.

        • redcalcium@lemmy.institute
          link
          fedilink
          arrow-up
          4
          ·
          7 months ago

          I guess there is no way to escape the extra stress to the port. Maybe using this kind of detachable magnetic adapter can help with reducing the strain? They don’t conform with usb specification though, so while it may reduce strain to your port, it may carry another risk like making it easier to accidentally shorting some exposed pins.

          • scrion@lemmy.world
            link
            fedilink
            arrow-up
            3
            ·
            7 months ago

            Nice, I did not know such a connector existed - that will be useful for completely different and unrelated use cases.

            While I had toyed with the idea of a portable, Japanese - made DAC for a while, I switched to Bluetooth headphones years ago. Started out with a cheap Philips headset for $50, later on got the Bose QC 35 II (still my daily driver when outside) and finally worked my way up to the Sony WH-1000XM5.

            I did not realize how nice active noise cancelation is. Plus, the frequency reproduction of the XM5 with LDAC enabled is absolutely fine.

            On the cons side, you’re walking around with $300 - $400 on your head, which is an absolutely luxury, plus you’ll get headphones that perform equally well in the sound department (minus the excellent ANC and freedom from cables) for a lot less.

    • Duallight@lemmy.today
      link
      fedilink
      arrow-up
      3
      ·
      7 months ago

      I’m the same, those dongles don’t last, and are annoying to use. I picked up one of these cables from aliexpress to use with my iems and it works a treat. There’s better quality cables out there, but for 10 bucks these are solid.

      • For the moment I’m on a budget so DACs are not in my budget. They seem fun though, and I do love my hi-fi so, who knows, may be worth?

        The latter image, I used dongles like that. They broke within months and I had tried multiple brands, I soured on them a few brands deep.

          • catnash [she/her, ae/aer]@lemmy.blahaj.zone
            link
            fedilink
            English
            arrow-up
            2
            ·
            7 months ago

            I did for a long time settle for adjusting the phone in the pocket, even putting things in there to change the position of the phone, but no, it never helped much. I’ll look in to getting it or something like it, thanks so much!

            It was sad, yes, but I found that the dongle I already used for my laptop worked a charm with my phone. Sometimes plug in a keyboard and SD cards. Somehow handles it. I only really used an SD card for cameras and portable recording devices.

            I think my needs in audio are mostly driven by my career. If I was not a music-person I would not need wired earphones. The driving factor of my having them is that I could pull them out of my phone and work on my laptop very quickly. BT headphones just had too much latency and not the best soundstage or frequency response…