Voices Of The Void, the game will just randomly decide to disable pausing so you can’t save and will lose a bunch of progress if you quit.

Thanks, but unfortunately i only have a 0.2 nozzle. Solid walls beyond 0.5mm in thickness border on impractical for an airplane anyway. I had success printing walls as thin as 0.15mm, but that only works with at least a little bit of infill, if i have to make it heavier i would rather just do that.

Thanks for the recommendation. I can freely redesign it, but i don’t think slicing is causing any issues here. FreeCAD has no problem creating thin meshes and Orca Slicer correctly generates just a single smooth curve for every layer.

Thanks for sharing. I had the speed set pretty high for all my attempts so this could be it. I’ll update the post when it finishes.

Thanks for the reply. The bed already gets way more time than it needs to heat up so that part is fine. Printing it a lot slower will probably help equalize temperature tho. I’ll try that and we’ll see if it works.

Thanks for the suggestions. I could definitely add some perpendicular supports to stabilize the print, but don’t want to do that except as a last resort since i know for certain that my printer is capable of the precision needed here. I will probably do that if the other ideas don’t work.

Thanks, i’ll try that.

Thanks for helping. It’s PLA at 210C, 60C bed temp, with an enclosure. The whole thing finishes in just 1.5h and is 25cm high so new layers might be getting placed before the ones below had time to cool down. I’ll try it slowed down and update the post when it’s done.

And you can even add programs.firefox.package = pkgs.librewolf; if you prefer it!

Fig 1. F I S H A C C E L E R A T O R

Unfortunately not, systemd is tightly integrated into NixOS and an option for alternative backends would have non-insignificant overhead so they aren’t going to introduce it. The next best thing is SixOS

Archer

This should work: https://www.makeronline.com/en/model/DO NOT TALK TO COMPUTERS/252643.html

Nah, i actually just started out with 3D printing. All i did was take the design from here, remove everything except the outline, make some light tweaks and use the final image as a displacement texture in blender. You could pretty easily do this with any image, and seeing how much people like this one, i’ll probably make some similar stuff in the future.

Just uploaded it here: https://www.makeronline.com/en/model/DO NOT TALK TO COMPUTERS/252643.html

Have fun :3

It’s just a convention. commands starting with $ are meant to be executed by a user. commands starting with # are meant to be executed by root.

8x + 2

Maybe it’s just RegEx. 0 or more "F"s allowed. e.g. CK, FCK, FFCK, …

This is why i like robinson projection, same thing as mercator except squished by the cosine of latitude to account for area distortion

A fridge is never just sitting idle, what reason is there to ever turn one off instead of unplugging?