Back in 2007 I built myself a gaming PC with two brand new GTX 8800 cards (SLI, baby!) and nearly cooked/choked them to death in first week of operation. What I learned back then was that nVidia drivers did not create a proper fan curve that would ramp up with rising temperatures and that I needed a piece of 3rd party software named Afterburner to keep my system cooled.
It’s been nearly 20 years and probably a dozen different graphic card models since then. I have just finished installing a render box for my wife with a 3090 in it. Installed the drivers. Installed the Afterburner. Tuned it.
Then it dawned on me: Is this still a necessary step? What would happen if I did not install Afterburner? Don’t nVidia drivers control the fans properly?
Logic dictates it would be crazy for the official drivers not to keep the card cool, but I’ve been doing it one way for so long that I am too afraid to experiment (risking hardware damage?).
When you’re afraid to let evidence lead you, next best thing is surely asking strangers on the internet - so here it goes: Is MSI Afterburner necessary? What would happen if I don’t install it? Do YOU have it installed?
You must log in or register to comment.
Removed by mod
I just built a new gaming pc with a 4080 super and 7800x3d in the lian li dan a4 h2o case and while the base fan curve is fine i adjusted the curves in afterburner and knocked an additional 10c off the temps. The thing with this case is that airflow is only coming from the gpu fans and aio radiator fans so if one isnt hitting temps to get the fans going, the airflow is going to suffer. I found this neat little program that actually allows it to control both fans based on the higher temp between the gpu and cpu, takes a little bit of understanding how to set it up but its indispensable for small form factor cases like mine. https://github.com/Rem0o/FanControl.Releases
Fan Control is great. Like you mentioned, the possibility to create mix fan curves is really helpful. For example, if either CPU or GPU gets hot, you can set all the case fans to ramp up. There are good guide videos on YouTube that shows how to set it up.
I’m also using FanControl and I think it’s great.
My case fans ramp up based on my GPU temperature.
The only issue I have with it is it needed an AMD plugin to work with my GPU, no biggie. But the AMD drivers seems to fight FanControl over the GPU fan speed. I may have done something wrong but they seemed to affect eachother. So now I control my GPU fans from the AMD drivers and the rest of my fans from FanControl.
Don’t forget to backup your config file somewhere. I’d hate to lose my config.
It is not the drivers that dictate the fan but the GPU bios. So how the card behaves depends on how the manufacturer tuned it which is to say, these days it’ll work fine. Many “high end” cards usually have a bios switch for silent or turbo mode so whatever.
Back when I had a 1080ti, I used afterburner to set my own fan curve. And now with my rx6900xt I use AMD’s adrenaline because it actually works great for many things including setting a custom fan curve . I’ve heard Nvidia’s first party software was a bit of a mess for oc stuff so that’s why Afterburner became so popular but I never installed anything past Nvidia’s drivers so maybe it’s good now, who knows.
Does Nvidia have first party software for OC, fan curve, undervolt and OSD?
That’s what I use Afterburner currently for.
Nvidia doesn’t, no.
IMO people need to talk about it more as a feature, because it’s so useful to have. Nvidia needs to take a leaf out of AMD’s book here.
In fact they need a new driver control panel full stop. It’s slow, ugly, missing features. Nvidia have a market cap of $1.8 trillion and they can’t make a driver control panel that isn’t a steaming turd. Kind of infuriates me that reviewers never talk about it.
Doesn’t need to be as comprehensive as afterburner, but they definitely should have something.
I’m not sure. Like I said, I never installed more than just the drivers from them when I had a Nvidia GPU. Just heard that whatever software they had wasn’t great.
Designed for the old-fashioned big PC cases. Custom fan curve is a must for everything deviating from that design.
You won’t cook anything without it anymore, but there are still some handy features
My experience with the last Nvidia GPU generations is the opposite, the fan curves are too conservative temp wise. Your card will get very loud trying to maintain a ~70C temp target. This of course changes with manufacturer and model.
With a 3090 I suggest an undervolt (even a modest one works miracles for the power hungry top tier cards). And after doing that, you can also dial in a slower fan curve.
While finding a good undervolt is time consuming (please do test, stress the heck out of it, with different apps/games), it was a god send to me. And it helps a lot with keeping the memory cool, which is something I worried a lot with the ram chips on the back of the board that the 3090 has.
It’s a must for me. I like my graphs and undervolting
I never used it
I’d still use it if I had NVIDIA card but now that I’m on AMD the Adrenaline SW + MPT it is.
And for monitoring in-game I just use RTSS with HWinfo64. Takes a lot more work to setup but I also get way more stuff if needed.
