• SkyNTP@lemmy.ml
    link
    fedilink
    arrow-up
    75
    arrow-down
    10
    ·
    1 year ago

    “the hot water isn’t working” could be understood to mean “the water in the hot water tap is not hot”, but it could also be understood to mean “the water is not flowing out of the hot water tap”.

    The picture helps clarify the original statement. OP, this interaction is not nearly as bizarre as you make it out to be. It’s pretty typical of virtually all support requests. It’s incredibly common, when asking for support, that the requester assumes information is obvious when it is in fact not.

    • Perfide@reddthat.com
      link
      fedilink
      arrow-up
      19
      ·
      1 year ago

      It’s still kind of a weird way to request that information. They could have just upfront asked “is the hot water tap not working at all, or is it just not hot?”.

      • Fosheze@lemmy.world
        link
        fedilink
        English
        arrow-up
        6
        arrow-down
        2
        ·
        1 year ago

        Having worked in IT I can tell you that often asking for specifics (even simple ones like what you said) will just get you a reply of “I don’t know it’s just broken. Fix it.” If you even get a response at all. Asking for a screenshot (or a picture in this case) is an action that you are requiring the user to take and is much more likely to at least get a response even if the response isn’t always helpful.

        If the landlord had just asked for clarification I wouldn’t be surprised if they just got a response of “It just doesn’t work.” Which is far less helpful than even that picture.

    • CheshireSnake@iusearchlinux.fyi
      link
      fedilink
      English
      arrow-up
      15
      arrow-down
      1
      ·
      edit-2
      1 year ago

      Yep. During my very short (6 mos) stint as a tech support rep for Dell, I’ve learned to assume your customer is an idiot. Even when they’re using techie terms or jargon (and at times more so). Never assume other things besides that or you’ll probably regret it.

      You have to be very clear and precise. A single misunderstanding can take a simple problem a lot of time to get fixed.

    • Macaroni_ninja@lemmy.world
      link
      fedilink
      arrow-up
      8
      arrow-down
      4
      ·
      1 year ago

      While I agree with everything you wrote, this conversation is far from a typical support request. Both sides are fucking idiots without any common sense.

    • Stantana@lemmy.sambands.net
      link
      fedilink
      English
      arrow-up
      4
      ·
      1 year ago

      “the hot water isn’t working” could be understood to mean “the hot water refuses to go out and get a job”, but it could also be understood to mean “the hot water is just sitting around in it’s boxers all day drinking beer”.

      • Fosheze@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        Not sure what you’re talking about. Hot and cold water definitely use different pipes. I’m not even sure how that would work with one pipe unless you were mixing right at the water heater or something.

        • RagingRobot@lemmy.world
          link
          fedilink
          arrow-up
          5
          ·
          1 year ago

          The faucet not the pipes. The picture is of a faucet and there is one. Likely because hot and cold water both come out of it

          • jarfil@lemmy.world
            link
            fedilink
            arrow-up
            1
            arrow-down
            1
            ·
            edit-2
            1 year ago

            The faucet tends to have some sort of control apparatus (maybe a “valve”, sometimes festooned by a “knob”) to enable the user to interactively choose the amount of water from each pipe that goes into the faucet.

            Now, such apparatus might be comprised of two valves, each one for hot and cold water separately, or a single control which may be rotated to select the mixture amount, or an automaic thermostatic apparatus with a target water temperature dial that the operating user may set to a target temperature which may be called “hot” or “cold” and will adjust the water mixture from the hot and cold water pipes accordingly.

            OP’s picture seems to have been sent in bad faith, but it does include a control apparatus comprised of a valve with a knob, which can be construed as the tenant showing they had done their due diligence in discovering it is by turning the pertaining knob to open the hot water pipe valve, and nothing else, that after a reasonable waiting period, the water coming out of the faucet is indeed still cold and not hot as intended by the expected behavior of the installed mechanism.

            If the tenant misled the landlord by showing a tap which had only a single cold water pipe connection, or failed to correctly operate the valves connected to the faucet in order to produce the desired hot water, then the landlord could fairly charge them with any delays or extra charges incurred from being provided with false information, like the cost of sending a plumber to check on the heater… instead of a dog with a stick to bonk the tenant for being an idiot and not turning the right valve to the faucet.

  • Wogi@lemmy.world
    link
    fedilink
    arrow-up
    48
    arrow-down
    12
    ·
    1 year ago

    None of y’all are plumbers and most of y’all work in IT and it fucking shows.

    This is not a case where a photo is required or even all that helpful.

    A photo shows that water is running. Is it hot, is it cold, is it lukewarm? Who knows?? Certainly not the landlord.

    Probing questions sure would have been helpful. Like is the water lukewarm or cold?

    If it’s either it doesn’t matter, the heater is not working and a plumber is required.

    Now what if the water isn’t running? Well then the response would indicate that.

    “No there’s no water at all when I turn on the hot water.”

    Ok that’s an entirely different problem, could be the heater, could be someone turned a valve off.

    But even that much information isn’t all that important because no matter what the problem is, or where it’s located, the tenant will not be able to resolve this issue, a plumber is required. They’ll need access to the premises, because water heaters are generally inside the unit, which means the tenant will likely need to be present when the plumber shows up.

    The plumber is absolutely not going to show up with a water heater based on what information he can get out of a text. He’s going to come in, and investigate the issue. Sometimes it’s a quick fix, sometimes it’s a problem. Generally the tenant is going to have absolutely no way of resolving it themselves, and generally a landlord wouldn’t want them to.

    This is not an IT ticket, it’s a "call a fucking plumber my shits broken " ticket.

    • jarfil@lemmy.world
      link
      fedilink
      arrow-up
      15
      arrow-down
      4
      ·
      edit-2
      1 year ago

      None of y’all are plumbers and most of y’all work in IT and it fucking shows

      You’re not a plumber and you lack problem fixing skills and it fucking shows. 🙄

      The photo shows:

      • water is running, meaning: the faucet works, the pipe to the faucet works, the water is not shut off
      • the faucet seems to be of a two valve kind, meaning: if the tenant is not an idiot and didn’t turn on the wrong valve, and they did wait a reasonable time for hot water to come out, then the problem is not with the faucet but with the heater
      • the faucet can not be the problem, meaning a plumber does not need to carry a spare faucet, but the pipes could be hooked up wrong (hot pipe to cold valve and vice versa), which could be and easy fox for the landlord themselves without having to pay a plumber

      Probing questions would be only useful if the tenant spent some effort on answering them, instead of, for example:

      is the water lukewarm or cold?

      A: Yes.

      what if the water isn’t running?

      A: There is no hot water.

      This is not an IT ticket, it’s a general problem solving procedure issue.

  • jafffacakelemmy@kbin.social
    link
    fedilink
    arrow-up
    24
    arrow-down
    1
    ·
    1 year ago

    See, you may laugh but the landlord now knows that the water is still flowing, so the cause isn’t an area-wide outage or a burst pipe, but instead there’s a fault in the system that heats the water.

  • mayo@lemmy.today
    link
    fedilink
    arrow-up
    22
    arrow-down
    9
    ·
    1 year ago

    Tenant providing bear minimum information and impatient landlord. Engaging post OP.

  • Queen HawlSera@lemm.ee
    link
    fedilink
    English
    arrow-up
    8
    arrow-down
    3
    ·
    1 year ago

    I imagine he only asked so that in court he could say that he asked only for you to become combative, that’s proving that you were responsible for the issue not getting fixed.

    • Bgugi@lemmy.world
      link
      fedilink
      arrow-up
      8
      arrow-down
      1
      ·
      1 year ago

      It sounds like one of two things to me:

      1. For a small landlord: some kind of hack taught at a “get rich quick” slumlording class. Something to add friction to the exchange, so the problem either fixes itself or the tenant forgets/misses a message.

      2. For a big corpo landlord: probably complying with some really stupid corpo policy surrounding “objective evidence” in a “not my job” kind of way.

    • HalalGabagool@lemm.ee
      link
      fedilink
      arrow-up
      4
      arrow-down
      2
      ·
      1 year ago

      “The how water is not working” is just bad phrasing. “There’s no hot water” describes the problem better. Boiler issue. Burners go out. Boilers go bad every 5 years. Owning a house is becoming a burden. Shit like that.